How to Wax a Car With a Buffer: A Short Guide for Beginners

Waxing a car is not too complicated, but it would take a lot of time if you want to do it perfectly.

When doing it by hand, you can expect to spend half a day doing it. Those who are meticulous might even take a whole day to make it shiny.

Learning how to wax a car with a buffer would help speed things up since you won’t have to buff the car by hand.

A buffer can make a spot shiny in just a few seconds, so it is a good option if you don’t want to waste time doing it manually.

Waxing your car with a buffer also provides an added shine since your hands can’t replicate the work of a machine.

If you have no idea how to use a buffer or you are scared that you might damage your car, we’ve prepared a short guide you can follow.

How to Wax a Car With a Buffer

Before anything else, you have to prepare all the things that you need in advance so that everything goes smoothly.

This would prevent any unnecessary trip back inside your house if you forgot to bring something out to the garage.

Here are the things that you would need:

  • Car wax
  • Microfiber towels
  • Finishing pad
  • Machine buffer

Step 1: Clean your Car

You have to prepare the surface before you apply the wax. To do this, you would need to clean your car thoroughly.

Make sure that all of the dirt and grime are removed from the surface because it would affect the longevity of the wax. You can use a clay bar to remove embedded dirt.

If you are going to clean your car, make sure that you do it in the shade or inside the garage.

Avoid direct sunlight at all costs because it would make the wax dry too quickly before you can even buff it.

You only need to use water and soap to clean your car. Make sure that the detergent is safe for car-cleaning, or it would affect its color.

Step 2: Start Applying the Wax

Get the applicator pad and attach it to your machine buffer. Put several dots of car wax on the pad into a circle and put a large one in the middle.

The next thing to do is to use it to apply the wax on several spots on the section that you are going to work on.

When doing this, make sure that the machine buffer is turned off. This would allow you to spread the wax on the surface evenly.

Step 3: Start Buffing the Surface

Start the machine buffer after applying car wax to the surface. Let the machine do the work and wax that particular spot using light pressure.

You have to be very careful and buff the area in long, straight strokes.

Pass the section about two to three times, but constantly check if there is wax on the surface before going through.

This would prevent any damage just in case the wax on the surface is not enough. Again, make sure that you only use light pressure because it might damage the paint.

Your main goal is to apply a thin coat of wax. Putting too much will be a waste of money, and you would have a hard time wiping it off.

how to wax a car with a buffer

Step 4: Removing the Wax

You cannot remove the wax immediately after applying it. Instead, you’d have to wait for a few minutes for the wax to dry before you start wiping.

Check the product that you are going to use and see if there are instructions on how to use it. You can also manually check if the wax is already dry by using the finger method.

Just use your finger and swipe it on the surface. If your finger gets smeared with wax and there is still some left on the surface, the wax is not yet dry.

On the other hand, if you did not see any wax on the surface and on your finger, it means that it is already dry.

Once the wax dries, use the clean microfiber towel to remove the wax from the surface of your car. Wipe the wax in long straight lines to avoid any scratches on your car.

You should use a single towel in removing most of the wax on the car, and use another clean towel to remove the remaining wax.

Benefits of Waxing Your Car

Waxing your car provides a wide range of benefits. In fact, it is one of the most recommended things that you should do to maintain your car’s surface.

Here are the reasons why you should wax your car regularly:

1. Protection from Scratches

Car wax can protect your car from minimal scratches that it usually gets when you regularly drive outside.

Instead of the surface of your car, the car wax is the first one to get damaged.

2. Prevents Hard-to-Remove Dirt

Putting car wax on the surface of your vehicle can prevent dirt from sticking to it.

You have to remember that dirt would be very hard to remove once it hardens, and it might even scratch your car when you are removing it.

Using car wax would guarantee that the surface of your car will always be smooth and shiny.

3. Gives It a Shiny Finish

This is the most important benefit of car wax and is also the main reason why a lot of car owners use it.

This is the best way for you to maintain the appearance of your car or even improve its overall look.

4. Maintains the Paint

Since car wax can prevent small scratches, it can also protect the paint of your car. Putting car wax would make sure that the paint of your car lasts for a long time.

Conclusion

Learning how to wax a car with a buffer is very important because it is more effective than doing it manually.

Waxing your car with a buffer helps save more time, and it provides a shinier look to your car.

Doing it by hand is not a bad idea, but once you’ve tried using a machine buffer, you will not go back to manual waxing.

Click Here to Leave a Comment Below

Leave a Reply: